• Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
+
  • Product Describe
  • I. Overview of the Reaction Frame

    According to the Ministry of Railways’ standard TB/T-3043-2005, prestressing tensioning equipment for bridges shall be calibrated monthly. However, due to the heavy weight and cumbersome handling involved in the metrological verification of jacks and oil pumps by the metrology authorities, as well as the high cost of such verifications, a jack load testing system has been developed to address these shortcomings. This system features simple operation, rapid and convenient testing, and reduced testing costs for construction units. When equipped with additional components, it can also be used for the molding of high-pressure, high-strength test specimens and for performing compressive strength tests on such specimens.

    II. Technical Specifications for the Reaction Frame

    Reaction frame capacity: 300 kN, 500 kN, 1,000 kN, 3,000 kN, 5,000 kN

    Reaction frame test space: 850 mm

    Reaction frame net weight: 1850 kg

    Maximum test force of the load cell system: 300 kN, 500 kN, 1,000 kN, 3,000 kN, 5,000 kN

    Indication accuracy: ±0.03% FS, ±0.05% FS (linearity + hysteresis + repeatability)

    Permitted overload: 150% FS

    Permitted temperature range: -30~+70℃/+85℃

    Output sensitivity: 2 ± 0.5 mV

    III. Reaction Frame Structure

    The reaction frame consists of an upper pressure plate, a lower pressure plate, vertical columns, nuts, lock washers, and other components.

    IV. Operating Procedures for the Reaction Frame

    1. Erect the mold vertically, add the weighed soil sample into the mold in 2–3 portions, and compact it evenly using a tamping rod. Then insert the upper and lower pressure rods into the mold, ensuring that the exposed lengths of the two rods are equal.

    2. Adjust the height of the top plate according to the height of the test specimen to achieve the jack’s working height.

    3. Place the mold cylinder and the upper and lower compression rods between the top plate and the jack, apply pressure until all the compression rods are fully inserted into the mold cylinder, hold the pressure for 1 minute, then remove the mold cylinder and place it on the demolding device to extract the test specimen.

    V. Precautions for Using the Reaction Frame

    Before use, first check whether the connecting nuts of the reaction frame are loose. Place the jack under test in the central testing area of the reaction frame, connect the hydraulic hose between the jack and the oil pump, position the force sensor between the jack and the upper pressure plate of the reaction frame, connect the data cable between the force sensor and the force display unit, and after powering on, allow the system to warm up for 5 minutes. Then start the oil pump and, in accordance with GJJ-621-2005 (Verification Procedure for Hydraulic Jacks), apply load step by step while recording the readings from the force display unit.

Company Profile

Hebei Yinfeng Experimental Instrument Co., Ltd. is a high-tech enterprise dedicated to the research and development, production, and sales of experimental instruments. The company is headquartered in Hebei Province, relying on the strong industrial foundation and technological innovation resources in the Beijing Tianjin Hebei region. It is committed to providing high-precision and high reliability testing equipment and solutions for material testing, engineering quality control, scientific research experiments and other fields.

Plant
Factory environment
Workshop
Workshop environment

Customized Delivery Process

We provide customers with full-process services ranging from pre-sale consultation, customized solution design, equipment installation and commissioning to after-sale technical support.

Online Communication

Provide Custom Drawings

Merchant Quotation

Sign A Contract

Processing And Production

Packaging And Distribution

Confirm Receipt Of Goods

Successful Transaction

Previous:

  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
  • Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
Reaction Frame
+

Reaction Frame

According to the Ministry of Railways’ standard TB/T-3043-2005, prestressing tensioning equipment for bridges shall be calibrated monthly. However, due to the heavy weight and cumbersome handling involved in the metrological verification of jacks and oil pumps by the metrology authorities, as well as the high cost of such verification, a jack load testing system has been developed to address these shortcomings. This system features simple operation, rapid and convenient testing, and reduced testing costs for construction units.

If you need customized products,  Contact US !

Share to

Request a Quote

We will contact you within one working day. Please pay attention to your email.

Related Products

Content update in progress

Request Quote

We will contact you within one working day. Please pay attention to your email.

SUBMIT